What this product does

The Emergency Metal Exit Sign Light developed by ORASKA INDUSTRIES is a device in a public facility (such as a building, aircraft or boat) denoting the location of the closest emergency exit in case of fire or other emergency. The Module contains one battery unit inside which can provide power to the light sign during power failure. When public electric supply stops suddenly, the emergency light keeps lighten automatically. When public electricity supply returns to normal, the light unit draws power from main power line and recharge the batteries up to a threshold level. That automatic power switching technology makes the Exit Sign Light to keep lighting all the time weather the Electricity is present or not. Moreover, with innovative energy efficient technology, the ESL-P1V2Y15A can save up to 76% of power consumption for Pulsed controlled LED drive which makes an eco-friendly solution for your factories, shops, auditoriums, office buildings, hotels, banks, hospitals, post offices, scientific and educational agency, underground, family, high building and fire brigade with 5 hours of Smart Back up.

Features

• Heavy Duty Battery 6V-4.5AH
• 5 Hours Intelligent Backup
• Charging Status Indication
• Protection against battery overcharging and full discharging for longer battery life
• Continuous Light up during power failure
• Built in AC Charger
• External panel mount safety fuse
• High Inrush Current Protection and Power Factor correction Technology
• 18 watt LED Light
• Transparent acrylic wider light distribution

Specifications

• Input Supply Voltage: AC85-265 Volt
• Input Power: 30W/50W/80W/100W/200W
• LED Lamp Source: COB (Chip-On-Board)/SMD
• Color Temperature: 3000-3500K / 6000-6500K
• Quantity of COB : 1/2/3/4
• Efficiency: Greater than 82%
• Efficacy: 90lm/watt
• Time to reach the nominal luminous flux: 200ms
• Light distribution Type: Wide Range symmetrical
• Average Life-time: 50000Hr
• Life time of 75% of luminous flux: 30000Hr
• Temperature Operation [°C]: -20°-+40°
• Maximum Temperature on the body: 60-80 degree Celsius
• Color of the Body: Black/Grey
• Beam Angle: 120°
• Body housing: Die Casting Aluminum with Temp. Glass/Acrylic
• Protection grade: IP65 / IP66
• General Application: Outdoor use, Commercial, Industrial, Leisure

Battery Charging Specifications

• A Well Designed SMPS Based Capacitive "Intelligent Charging System"
• Combination of trickle charging and float charging method
• Protection against overcharging and full discharging
• Emergency Conversion Time ≤ 15ms
• Full charge time 4~6 hours
• Input 180V~240V,50/60 Hz, 200mA charge/time, AC main Line, PF=0.67
• Input Power 2800mW
• High inrush current filtering and power factor correction technology implemented

Battery Specifications

• 6 V, 4.5 Ah Sealed Lead Acid Battery
• Aprox. 500 times charging cycle

Sign Light Specifications

• High power 30 LED connection
• 18 Watt output sign light power with high penetrating ability
• 900~1200 Lumen output luminous flux
• Uniform Light Distribution through all the sign board
• Approx, 50~60 feet distance coverage with 450 viewing angle
• Red, Green, Blue, White light sign available

Physical Dimensions

• 18 x 8 x 3.1 inch soft metal casing
• Mass / unit: 2300 gm
• Fire Proof Metal Body

Caution

• Do not touch the device with bare hand if your body is grounded.
• Make sure to unplug the unit before changing the fuse.
• Make sure to turn off all the switches if the device is not in use for a long time.
• To prolong battery life, charge the battery for 24 hours when the lamp is not in use. It is also advisable to discharge the battery for every 3 months.
• Do not power up the device if the circuit is not connected with the battery unit.