WHAT THIS PRODUCT DOES

The Emergency High Beam Two headed Fog light developed by ORASKA INDUSTRIES is a kind of practical and reliable emergency light source. When public electric supply stops suddenly, the emergency light turns on automatically. When public electricity supply returns to normal, it turns off automatically and recharge the batteries up to a threshold level. Moreover , with innovative energy efficient technology, the HBM-V4Y18B can save up to 81% of power consumption for Pulsed controlled LED drive which makes an eco-friendly solution for your factories, shops, auditoriums, office buildings, hotels, banks, hospitals, post offices, scientific and educational agency, underground, family, high building and fire brigade.

Battery Charging Specifications

• A Well Designed "Intelligent Charging System"
• Combination of trickle charging and float charging method
• Protection against overcharging and full discharging
• Emergency Conversion Time ≤ 100ms
• Full charge time 16~18 hours
• Input 180V~240V,50/60 Hz,60mA charge/time, AC main Line
• Input Power 600mW
• Full charge LED indicator, Charging/ Resting indication LED

Battery Specifications

• 4 V, 1600 mAh Sealed Lead Acid Battery
• Aprox. 200 times charging cycle

Fog Light Specifications

• High power 6 LED connection
• 6 Watt output power with high penetrating ability equivalent to 30 watt Halogen Lamp
• 450~500 Lumen output luminous flux
• Approx, 50~60 feet distance coverage with 450 viewing angle
• Warm yellow, Light Yellow, Warm White fog light color available

Physical Dimensions

• 10.5 x 6 x 3.1 inch soft metal casing
• Mass / unit: 650 gm
• Fire Proof Metal Body

Features

• Heavy Duty Battery 4V-1600mAH
• 2 Hours Intelligent Backup
• Battery Test Switch
• Charging Status Indication
• Protection against battery overcharging and full discharging for longer battery life
• Auto Light up during power failure
• Built in AC Charger
• External panel mount safety fuse
• 6 watt LED Light
• 4 inch dome reflector for wider light distribution

Specification

• Input voltage: 180V-240V,60mA,50/60Hz
• Lamps: 2×3Watt LED Light
• Luminous Flux: 450-500 Lumen net directional output
• Luminous Intensity: 15 LUX Light at 10 feet distance @ Full Charge
• Battery: 4V-1600mAH Heavy Duty
• Recharging Time: 12-14 Hours
• Response Time: Less than 100 ms
• Capacity of Fully Charge Battery: 3 Hours
• Operating Relative Humidity : Less than 85%
• Operating Temperature: -100C to 700C

Operation and Maintenance

• The unit should be charged for 24 hours before initial operation.
• It usually be installed in stairs, gate, and door channels and so on. Distance with the floor about 1.8 meter. There are two pieces hooks in the back of the light, can be hung the wall easily.
• Add the DC insurance and 220V public electricity, it will work after recharged 18 hours.
• The unit should always be connected with AC power source and the master switch be turned to the ON position for it to light up automatically after power failure. The light will be turned off automatically after 2 hours and the system will hibernate to prolong battery life.
• Blue indicator light show public electricity, Yellow Indicator Light show battery already filled, Red indicator light stop means recharging, Red indicator light means Fire Alarm.

Caution

• Do not touch the device with bare hand if your body is grounded.
• Make sure to unplug the unit before changing the fuse.
• Make sure to turn off all the switches if the device is not in use for a long time.
• To prolong battery life, charge the battery for 24 hours when the lamp is not in use. It is also advisable to discharge the battery for every 3 months.
• Do not power up the device if the circuit is not connected with the battery unit.